KALAN DE ARAW REFLECTOR CONES

FLAT PATTERN OF REFLECTOR

Sribe to the steel sheets. Cut but leave 5 mm on outer cirlce. Solder all together. Solder 5 mm diameter wire on outer circle of cone 1 to reinforce and stiffness and remove sharp edge.

More to come!!!

Here is a render of Kalan de Araw.

It collect light energy or photon energy radiated by the sun and focus at the pot.

With these type you could save your money for cooking. It will cost you USD 30 only to actually build these KDA.
Tools are soldering iron 100 watt, steel sheet cutter.
Go to welding shop for the arms and legs construction.
Put weight on legs and wire on arm if wind is blowing hard.
Your electric bill will be low on summer.

Cooking rice: add rice on the boiling water which twice the volume of rice. wait 30 minutes to cook the rice.

The reflector is compose of 5 pieces cut stainless steel mirror surface sheet welded (the thin blue horizontal line) or braze together to form a parabolic reflector (strips is a cone strip from analytic geometry), or a composite of Galvanize sheet and aluminum foil. the reflector can be rotate vertically and fix by the loosening and tightening the lock nut. It can rotate horizontally at PIVOT. 2 arms and pot holder are welded together. the 4 legs are welded to the pivot pipe.

Kalan de Araw is actually 3 pcs, the reflector to arm by lock nut, insert arm and pot holder to pivot with leg. you could put weight on the leg and tie the reflector during wind storm. The reflector could be easily rotate at a 3 axis because the center of gravity is approximately at the focus of the reflector and where the photon is concentrated.

Put your black pot with your favorite dish on the pot holder and focus the photon rays you collect from the Sun. after 45 minutes it is done. be sure there is plenty of sun rays (photon or light rays).

Hope you gain even a little in me these can only means a lot, really really lots. you know right.

KALAN DE ARAW

Reflector can be made from galvanize steel sheet with aluminum foil, use solder for joining.

Legs, arms, pivot is galvanized steel pipe.

Reflector should be tilting at pivot bolt. arm is rotating at pivot.

LEGION OF MARY - NUESTRA SENORA DE LOS ANGELES

Abutin natin ang Langit.

Tesera

Panalangin sa Pasimula

Sa ngalan ng Ama at ng Anak at ng Espiritu Santo. Siya Nawa.

V. Halina, O Espiritu Santo, laganapin mong lubos ang puso ng mga tapat sa iyo at papag-alabin sa kanila ang apoy ng Iyong Pag-ibig. Ipadala ang iyong Espiritu at mangyayari sila.

R. At Iyong mababago ang lupang ibabaw.

Tayo'y Manalangin:

O Diyos na aming Ama, ipagkaloob Mo ang mga handog ng Iyong Banal na Espiritu sa daigdig. Isinugo Mo ang Espiritu sa Iyong Simbahan upang simulan ang pagtuturo ng Ebanghelyo. Hayaan Mo ngayon na ipagpatuloy ng Espiritu ang paggawa sa daigdig sa pama-magitan ng mga puso ng lahat ng sumasam-palataya. Sa pamamagitan ni Kristong aming Panginoon. Amen

V. O Panginoon, buksan Mo nawa ang aking mga labi.
R. At pupurihin ka ng aking bibig.
V. O Diyos, ilawit sa akin ang iyong tulong.
R. O Panginoon, madali ka sa pagsaklolo sa akin
V. Luwalhati sa Ama at sa Anak at sa Espiritu Santo.

R. Para noong una, ngayon at magpakailan man at magpasawalang-hanggan. Siya Nawa.